Blizzard Snowplow 800HD Owner's Manual download pdf (Page 8)

Lit. No. B64090, Rev. 05 8 March 1, 2009

OPERATION

Your snowplow is the most advanced and versatile

straight blade on the market. The easy-to-use controls

allow you to automatically adjust the snowplow blade

into an inﬁ nite number of plowing positions. Review

the illustrations below for instruction on maneuvering

your snowplow.

A. Lowered or Float Position

Pushing the joystick forward, toward the

"Lower/Float" designation on the label, or

pushing the D button on the touchpad will lower

your straight blade to the ground. Pushing and

momentarily holding the control in this position will

allow the snowplow to "ﬂ oat," or follow the contour

of the ground when moving forward or backward.

B. Raised Position

Pulling the joystick back, toward the "Raise"

designation on the label, or pushing the U button

on the touchpad will lift your straight blade off of

the ground. To stop raising the snowplow, simply

return the joystick to its "neutral" or center position

or release the touchpad button. The snowplow has

reached its maximum raised position when the

blade stops lifting.

C. Angled Right Position

To angle your straight blade to the right, position

the joystick toward the "R" on the label or push

the R button on the touchpad. To stop angling the

snowplow, return the joystick to its "neutral" or

center position or release the touchpad button.

The snowplow has reached its maximum angled

position when the blade stops moving to the right

side.

D. Angled Left Position

To angle your straight blade to the left, position

the joystick toward the "L" on the label or push

the L button on the touchpad. To stop angling the

snowplow, return the joystick to its "neutral" or

center position or release the touchpad button.

The snowplow has reached its maximum angled

position when the blade stops moving to the left

side.

NOTE: To prevent premature failure of the power

contactor (solenoid), return the joystick to its

neutral (center) position or release the touchpad

button immediately after the blade reaches the

limit of any position. Continuing to hold the

control after the blade has reached the limit of

movement in any position will reduce the life of

the solenoid.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments

Blizzard Snowplow 800HD Owner's Manual Page 8

Comments to this Manuals